You’ve probably heard of fire detectors before. They are very similar to an alarm clock; the only difference is that they are activated by fires that may occur in the building. While they do a good job of warning you that a fire has broken out in the building, you’ll have no way of knowing the proximity of the fire, which exit to take or how to respond. These systems have a small range and cannot provide detection in a large building. In such cases, many detectors would have to be installed in a building in order to cover up the total area. This means higher costs for the same amount of efficiency. Definitely not a win-win situation. However, there are better alternatives, such as automatic fire detection systems in Adelaide, that provide fire detection with a wider range. Not only does this save costs, it improves the evacuation procedure as well.

While traditional fire detection systems have the ability to raise an alarm in the event of a fire, they have a very limited range which means that they would have to be installed throughout the building to be effective. In addition to this, they cannot notify you that a fire has broken out outside of the assigned range. This means that you may be unaware that a fire has broken out even if you are in the same building. However, spontaneous fire detection systems are designed to inform all the occupants of the fire, regardless of where the fire breaks out. This allows all occupants of the building to evacuate in a timely manner. This is especially beneficial for larger buildings, where occupants may be far away from the blaze and need to be notified before it comes too close.

Apart from having the potential to save your life in the event of a fire, the automatic fire detection system can help save your resources as well. Due to its advanced detection features it has a larger range than traditional systems which means that less detectors are required to cover a single building. This may translate to lower costs for you. In addition to this, it has a centralized model which allows for an effective fire evacuation strategy. While the detectors are the primary devices that measure the fire’s spread, the automatic fire detection system consists of a wide range of devices required for managing an evacuation. These systems are designed to detect a routine power shortage as well. The information is sent to the safety officer who communicates directions and specific information on how the occupants should evacuate the building. Therefore, the automatic fire detection is your best option in terms of fire safety, speed, effectiveness and disaster control.

Categories: Industrial Services